Investigation of Physico-Chemical Properties of CH3NH3PbI3 and CH3NH3PbI3–xClx Hybrid Perovskites Thin Films for Photovoltaic and Optoelectronic Applications: A Comparative Study

CH3NH3PbI3 and CH3NH3PbI3–xClx, hybrid perovskites thin films were grown on glass substrates employing spin-coating technique at different rotational speeds varying from 1000 to 2000 rpm. All the films exhibited a polycrystalline tetragonal structure with a preferred (110) orientation. For each rotational speed, the CH3NH3PbI3 and CH3NH3PbI3–xClx films had approximately the same order of the absorbance in the visible region of solar spectrum. The current–voltage measurements of the CH3NH3PbI3 and CH3NH3PbI3–xClx films showed a ferroelectric hysteresis behavior in the dark which it becomes Ohmic under the illumination indicating the microstructural improvement. The all samples were strongly resistive in the dark, and their electrical conductivity improving thousands of times under the illumination; it had varied in the ranges 25.5 × 10–3‒206.61 (Ω cm)–1 and 82.81 × 10–3‒689.47 (Ω cm)–1 for CH3NH3PbI3 and CH3NH3PbI3–xClx, respectively. Our results demonstrated that the 1000 and 2000 rpm were optimal parameters for CH3NH3PbI3 and CH3NH3PbI3–xClx films preparation, respectively. Moreover, the addition of the chlorine in CH3NH3PbI3 films improves their physico-chemical properties. Indeed, compared to the CH3NH3PbI3 prepared at 1000 rpm, the CH3NH3PbI3–xClx film synthesized at 2000 rpm had the thinner thickness 571.58 nm, largest crystallite size 204.81 nm, lesser dislocation density 2.38 × 10–5 lines nm–2, superior quality of surface morphology, higher band gap 1.53 eV, lower Urbach energy 276.23 meV, higher refractive index 2.96, higher electrical conductivity in the dark 82.81 × 10–3 (Ω cm)–1 and under the illumination 689.47 (Ω cm)–1. CH3NH3PbI3–xClx thin film synthesized at 2000 rpm has better quality that might be more suitable as a light absorbers films for photovoltaic cells and optoelectronic devices.