Study on electric towing tractor quantity based on cellular automata

Abstract Aircraft ground taxiing contributes significantly to carbon emissions and engine wear. The electric towing tractor (ETT) addresses these issues by towing the aircraft to the runway end, thereby minimising ground taxiing. As the complexity of ETT towing operations increases, both the towing distance and time increase significantly, and the original method for estimating the number of ETTs is no longer applicable. Due to the substantial acquisition cost of ETT and the need to reduce waste while ensuring operational efficiency, this paper introduces for the first time an ETT quantity estimation model that combines simulation and vehicle scheduling models. The simulation model simulates the impact of ETT on apron operations, taxiing on taxiways and takeoffs and landings on runways. Key timing points for ETT usage by each aircraft are identified through simulation, forming the basis for determining the minimum number of vehicles required for airport operations using a hard-time window vehicle scheduling model. To ensure the validity of the model, simulation model verification is conducted. Furthermore, the study explores the influence of vehicle speed and airport scale on the required number of ETTs. The results demonstrate the effective representation of real-airport operations by the simulation model. ETT speed, airport runway and taxiway configurations, takeoff and landing frequencies and imbalances during peak periods all impact the required quantity of ETTs. A comprehensive approach considering these factors is necessary to determine the optimal number of ETTs.