Effects of the use of acetone as co-solvent on the financial viability of bio-crude production by hydrothermal liquefaction of CO2 captured by microalgae

Hydrothermal Liquefaction (HTL) is a promising technology to produce biocrude from microalgal biomass that has captured gaseous CO 2 . However, several problems of this technology must still be solved to make it economically and technically feasible. One of the main problems in the financial viability of the HTL process is the low yield obtained when only water is used as a solvent, with results close to or lower than 30 wt%. This, in turn, increases the production cost to over 120 USD/BBL. In recent years, some authors have focused their efforts on increasing biocrude production through the extensive use of organic solvents, without considering the effects on economic viability. The present work evaluated the financial effect of using acetone as an organic co-solvent, finding that high acetone contents increased operating costs of the process, mainly due to losses in its handling and recovery. On the contrary, very low acetone contents had very little effect on the biocrude yield. It was possible to establish that concentrations close to 5 wt% of acetone, mixed with water, resulted in a yield of about 60 wt% and a production cost of 50 USD/BBL of biocrude, with an energetic densification of 30.25 MJ/kg and 8.60 ∘ API, classifying it as heavy crude, which makes it necessary to include refining processes for heteroatom removal. Chemical characterization of biocrude revealed a high content of nitrogenous compounds (23.6 wt%) and oxygenated compounds (10.7 wt%), which have to be removed for the subsequent production of commercial liquid fuels. It is concluded that the use of a water-acetone mixture allows for obtaining positive operating profits, which helps to the high capital costs involved in this type of technology, making it more financially comparable with the conventional petroleum industry. • Extensive use of organic solvents in hydrothermal liquefaction processes is not financially viable. • Hydrothermal liquefaction process using only water as solvent yields low yields to biocrude, which is not financially viable. • To make the process of obtaining biocrude oil from CO 2 capture microalgae hydrothermal liquefaction viable, production costs must be similar to those of conventional crude oil.

Authors

Institutions

Publication Details

Journal
Journal of CO2 Utilization
Published
2024-10-31
DOI
https://doi.org/10.1016/j.jcou.2024.102960
Citations
9
Primary Topic
Thermochemical Biomass Conversion Processes
Type
article
Field-Weighted Citation Impact
1.66
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Effects of the use of acetone as co-solvent on the financial viability of bio-crude production by hydrothermal liquefaction of CO2 captured by microalgae

David Ocampo, Elkin A. Gómez, Luis Alberto Ríos, Gabriel J. Vargas
9 citations
Journal of CO2 Utilization
Thermochemical Biomass Conversion Processes
1.66
article

Effects of the use of acetone as co-solvent on the financial viability of bio-crude production by hydrothermal liquefaction of CO2 captured by microalgae

David Ocampo, Elkin A. Gómez, Luis Alberto Ríos, Gabriel J. Vargas
article en
9 citations

Abstract

Hydrothermal Liquefaction (HTL) is a promising technology to produce biocrude from microalgal biomass that has captured gaseous CO 2 . However, several problems of this technology must still be solved to make it economically and technically feasible. One of the main problems in the financial viability of the HTL process is the low yield obtained when only water is used as a solvent, with results close to or lower than 30 wt%. This, in turn, increases the production cost to over 120 USD/BBL. In recent years, some authors have focused their efforts on increasing biocrude production through the extensive use of organic solvents, without considering the effects on economic viability. The present work evaluated the financial effect of using acetone as an organic co-solvent, finding that high acetone contents increased operating costs of the process, mainly due to losses in its handling and recovery. On the contrary, very low acetone contents had very little effect on the biocrude yield. It was possible to establish that concentrations close to 5 wt% of acetone, mixed with water, resulted in a yield of about 60 wt% and a production cost of 50 USD/BBL of biocrude, with an energetic densification of 30.25 MJ/kg and 8.60 ∘ API, classifying it as heavy crude, which makes it necessary to include refining processes for heteroatom removal. Chemical characterization of biocrude revealed a high content of nitrogenous compounds (23.6 wt%) and oxygenated compounds (10.7 wt%), which have to be removed for the subsequent production of commercial liquid fuels. It is concluded that the use of a water-acetone mixture allows for obtaining positive operating profits, which helps to the high capital costs involved in this type of technology, making it more financially comparable with the conventional petroleum industry. • Extensive use of organic solvents in hydrothermal liquefaction processes is not financially viable. • Hydrothermal liquefaction process using only water as solvent yields low yields to biocrude, which is not financially viable. • To make the process of obtaining biocrude oil from CO 2 capture microalgae hydrothermal liquefaction viable, production costs must be similar to those of conventional crude oil.

Journal of CO2 UtilizationVol. 89
Universidad de Antioquia (CO), Argos Cement (Colombia) (CO)
Openalex Percentile: Top 17%
Thermochemical Biomass Conversion Processes
1.66
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.