Comparative Analysis and Application of Mass and Heat Transfer Simulation in Fractured Reservoirs Based on Two Fracture Models

The projection-based embedded discrete fracture model (pEDFM) and its counterpart, the embedded discrete fracture model (EDFM), have become standard tools for the depiction of the fractures in reservoir simulations. Despite their widespread use, there are still some unclear areas in modeling the complex processes of mass and heat transfer within fractured reservoirs, particularly in both single-phase and multiphase flow scenarios. Our research introduces a numerical methodology for simulating the mass and heat transfer in fractured reservoirs which is developed by extending the framework of the pEDFM and EDFM. To gauge the effectiveness of these models, we devised two cases which were designed to evaluate the adaptability of the pEDFM and EDFM in scenarios involving an ultra-low permeability fracture or a high permeability fracture under single-phase and multiphase conditions. By using local grid refinement (LGR) as a reference, the results of the pEDFM were in reasonably good agreement with the LGR in terms of pressure, temperature, and saturation distributions. This comparison suggests that the pEDFM has a significant advantage in depicting the mass and heat transfer at the matrix–fracture interface compared to the EDFM. Furthermore, a comprehensive analysis of the flow trajectories in both the pEDFM and EDFM provided a reasonable explanation for their differences. Furthermore, the numerical applications involving the heat extraction of Enhanced Geothermal Systems (EGSs) and the water flooding in fractured reservoirs illustrate the adaptability of the pEDFM in the numerical simulation for complex geological conditions. The insights and conclusions obtained in this paper can enhance our understanding of the distinctions between the pEDFM and EDFM, aiding in the selection of the most suitable method for characterizing the fractures in numerical simulations.