Thermal Power and the Structural Parameters of a Wind Turbine Permanent Magnet Eddy Current Heater

Permanent magnet eddy current heating as a new type of wind energy utilization method, which is energy-saving, is zero-emission, and involves no pollution and a high utilization of wind energy, has attracted more and more attention. This paper deals with the simulation and optimal design of a permanent magnet eddy current heater (PMECH) driven by wind. Solid steel, closed-slot, and open-slot PMECH are proposed, and corresponding 2D finite element method (FEM) models are established. Using the skin depth concept, numerical analyses are conducted on the influence of the number, size, and position of copper strips on the thermal power of closed-slot and open-slot PMECHs, and the thermal power growth compared to solid steel PMECH. The results showed that there is an optimal value for stator wall thickness. When the air-gap length is 0.5 mm and the rotation speed is 200 and 1000 rpm, the optimal stator wall thickness is 16 and 9 mm, respectively. Compared to the influence of conductivity on thermal power, the influence of permeability is more significant. Compared with solid steel PMECH, both closed-slot and open-slot PMECH in a low-speed region can effectively improve thermal power, and the open slot has more obvious advantages. The maximum values of the thermal power growth (TPG) and thermal power growth rate (TPGR) of the closed-slot PMECH are 1.57 kW and 120.15%, respectively. The maximums of TPG and TPGR of the open-slot PMECH are 2.58 kW and 175.08%, respectively. The experimental results prove the validity of the analytical calculation.