Slope stability analysis of unsaturated colluvial slopes based on case studies of rainfall-induced landslides

Abstract Landslides in colluvial soils under rainfall have been identified as a significant problem due to their loose, heterogeneous nature and low shear strength. Evaluation of the stability of colluvial slopes under rainfall conditions is challenging. This study investigated two landslide failure case studies of colluvial soils to understand the failure patterns using finite element (FE) and limit equilibrium (LE) slope stability analysis methods under unsaturated conditions. Transient seepage conditions due to rainfall infiltration and failure were analysed using hydromechanical models. Here, a FE fully coupled hydromechanical model and a sequential coupling of a FE hydrological and LE mechanical model were used to evaluate the failure of variably saturated slopes. Results from the case studies revealed that the failure occurred due to the rise in the groundwater table in both cases. It was evident that there can be significant disparities in the pore water pressure profiles with the fully coupled and sequentially coupled analysis. The dynamic capability of the two models can also affect the interplay between the hydrological and mechanical aspects. When the thickness of the colluvium layer is large, the failure could potentially occur as a deep-seated failure along the boundary of overburden and the bedrock surface due to the large driving force. However, when the thickness is small, failure can occur along the colluvium-weathered rock surface. The outcomes from the study will contribute to mitigate the uncertainty of failure prediction of landslides in colluvial soils.