Multiscale analysis of Reynolds stresses and its dissipation rates for premixed flame–wall interaction

Direct numerical simulation (DNS) data of flame–wall interaction (FWI) has been utilized to analyze the multiscale nature of turbulent Reynolds stresses and dissipation rate tensor anisotropies within turbulent reacting flow boundary layers across a broad range of scales. The DNS data of head-on quenching of premixed flames propagating through turbulent boundary layers, representative of friction Reynolds numbers Reτ of 110 and 180, has been explicitly filtered using both two- and three-dimensional Gaussian filter kernels for the purpose of multiscale analysis. The low-pass filter results demonstrate the transition from a 2-component limit to a 1-component limit near the wall with increasing filter width, accompanied by a decrease in isotropy, suggesting a significant alteration in dominant flow patterns and a diminishing tendency toward isotropy. The high-pass filter results indicate a progressive increase in anisotropy with the progress of FWI at the channel center, emphasizing the anisotropy of the large scales with the progress of FWI. Furthermore, behaviors of the second and third invariants of the Reynolds stress tensor remain qualitatively similar to that of the dissipation rate tensor at all stages of FWI, suggesting a link between viscous dissipation and Reynolds stress distributions; notably, there is a stronger isotropic tendency in the dissipation rate tensor when the flame is away from the wall, intensifying with an increase in Reynolds numbers. However, as FWI progresses, the shift in the trend toward the 1-component limit indicates an increase in anisotropy within the turbulent reacting flow for the region near the center of the channel.