Efficiency of heat-treated sepiolite in the adsorption of Cd, Zn, and Co from aqueous solutions: A low-cost approach for wastewater treatment

This study investigated the adsorption of Cd, Co, and Zn ions onto unmodified and heat-treated sepiolite, focusing on the effect of contact time, initial pH, and heat pretreatments. Kinetic experiments were conducted in triplicate, and equilibrium experiments indicated that Co2+ had the highest adsorption preference, followed by Zn2+ and Cd2+. The adsorption efficiency for Co2+ significantly increased with higher initial pH, whereas Zn2+ and Cd2+ showed optimal adsorption at lower pH levels. Heat-treated sepiolite at 250 ℃ exhibited a higher surface area and adsorption capacity in comparison with unmodified and 150 ℃-treated sepiolite, which indicated the importance of heat pretreatment. The pseudo-second-order kinetic model better described the adsorption process, and it was confirmed chemisorption as the rate-limiting step. By increasing the contact time, adsorption rates enhanced, with equilibrium achieved within 480 min for all systems. Higher initial solute concentrations led to an increase in adsorption processes, with Co ions consistently showing higher adsorption efficiency in competitive multi-ionic solutions. Adsorption percentages varied with pH and thermal treatment, indicating the importance of these parameters in optimizing sepiolite’s adsorption capacity for heavy metal removal.