Enhancing the strength of tissue paper through pulp fractionation and stratified forming

Abstract The potential of combining stratified paper forming with pulp fractionation was investigated to improve the balance between low density, which enhances water absorbency and softness, and the dry strength of tissue papers. The selected fractionation approaches allowed us to separate especially stiff, low-fibrillated fibers (A fractions) from flexible, fibrillated fibers containing fines (detached segments of fibers, fibrils, or lamellae fragments) (B fractions). After characterizing the morphological properties of each fiber fraction, 20 g/m 2 model papers were produced with and without wet pressing to tune the paper density. At a density of 0.3 g/cm³, the tensile breaking stress of B papers was at least three times higher than that of A papers. The strain at break of B papers was also close to two times higher than that of A papers. Interestingly, bilayer papers A/B exhibited breaking stress values intermediate between those of A and B papers, while native pulp papers, i.e. , without fractionation and stratified forming, followed the trend of A papers. Notably, bi-layering the paper improved the breaking stress by up to twice as much without increasing the paper density, which could be highly beneficial in improving the balance of properties in tissue paper grades.