Simulation of Dendrite Remelting via the Phase-Field Method

The solidification of alloys is a key physical phenomenon in advanced material-processing techniques including, but not limited to, casting and welding. Mastering and controlling the solidification process and the way in which microstructure evolution occurs constitute the key to obtaining excellent material properties. The microstructure of a solidified liquid metal is dominated by dendrites. The growth process of these dendrites is extremely sensitive to temperature changes, and even a small change in temperature can significantly affect the growth rate of the dendrite tip. Dendrite remelting is inevitable when the temperature exceeds the critical threshold. In this study, a temperature-induced-dendrite remelting model was established, which was implemented through the coupling of the phase field method (PFM) and finite difference method (FDM). The transient evolution law of dendrite remelting was revealed by simulating dendritic growth and remelting processes. The phase field model showed that the lateral dendrites melt first, the main dendrites melt later, and the main dendrites only shrink but do not melt when the lateral dendrites have not completely melted or the root is not broken. The long lateral branches break into fragments, while the short lateral branches shrink back into the main dendrites. The main dendrites fracture and melt in multiple stages due to inhomogeneity.