Bending Properties and Lateral Resistance of Historic Timber Foundation Piles in Amsterdam, Netherlands

Historic quay walls in many Dutch cities are supported by an array of vertical timber piles which run through soft soil deposits and rest on a sand layer, providing end-bearing support. As these structures experience horizontal loads, the foundation piles are loaded in bending. This is the dominant loading case of pile foundations of dams, lock heads, and sometimes bridge abutments as well. To accurately model and evaluate the timber pile foundations, a proper estimate of their bending properties is essential. Therefore the mechanical properties of existing spruce foundation piles, retrieved from a historic quay wall (1905) at Overamstel in Amsterdam, Netherlands, were studied. Six piles were subjected to a four-point bending experiment. The outer fiber stress was kept constant between the point loads, leading to a failure at the weakest cross section. Measurements of the curvature and force distribution were taken along the pile length during loading. In addition, biological decay in the outer layer of the timber piles, also referred to as the soft shell, was identified with microdrillings. Internal strains were measured successfully by gluing fiber-optic wires inside the soft shell of the timber piles. The experiments indicated significant variations in modulus of elasticity and modulus of rupture across the tested population, but indicated a strong correlation. Modulus of elasticity averaged 16.5 GPa with a variation coefficient of 0.30, whereas the modulus of rupture averaged 23.2 N/mm2 with a variation coefficient of 0.26. Bacterial deterioration was found to be independent of both the outer pile diameter and the location along the timber pile. The soft shell had an average thickness of 21 mm, but it did not contribute significantly to the structural strength of the piles. This study could present a template for assessing the remaining service life not only of historic quay walls but also of other timber pile foundations under bending loads.

Authors

Institutions

Publication Details

Journal
Journal of Structural Engineering
Published
2024-10-28
DOI
https://doi.org/10.1061/jsendh.steng-13412
Citations
4
Primary Topic
Civil and Structural Engineering Research
Type
article
Field-Weighted Citation Impact
1.04
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Bending Properties and Lateral Resistance of Historic Timber Foundation Piles in Amsterdam, Netherlands

Mart-Jan Hemel, Mandy Korff, Dirk Jan Peters
4 citations
Journal of Structural Engineering
Civil and Structural Engineering Research
1.04
article

Bending Properties and Lateral Resistance of Historic Timber Foundation Piles in Amsterdam, Netherlands

Mart-Jan Hemel, Mandy Korff, Dirk Jan Peters
article en
4 citations

Abstract

Historic quay walls in many Dutch cities are supported by an array of vertical timber piles which run through soft soil deposits and rest on a sand layer, providing end-bearing support. As these structures experience horizontal loads, the foundation piles are loaded in bending. This is the dominant loading case of pile foundations of dams, lock heads, and sometimes bridge abutments as well. To accurately model and evaluate the timber pile foundations, a proper estimate of their bending properties is essential. Therefore the mechanical properties of existing spruce foundation piles, retrieved from a historic quay wall (1905) at Overamstel in Amsterdam, Netherlands, were studied. Six piles were subjected to a four-point bending experiment. The outer fiber stress was kept constant between the point loads, leading to a failure at the weakest cross section. Measurements of the curvature and force distribution were taken along the pile length during loading. In addition, biological decay in the outer layer of the timber piles, also referred to as the soft shell, was identified with microdrillings. Internal strains were measured successfully by gluing fiber-optic wires inside the soft shell of the timber piles. The experiments indicated significant variations in modulus of elasticity and modulus of rupture across the tested population, but indicated a strong correlation. Modulus of elasticity averaged 16.5 GPa with a variation coefficient of 0.30, whereas the modulus of rupture averaged 23.2 N/mm2 with a variation coefficient of 0.26. Bacterial deterioration was found to be independent of both the outer pile diameter and the location along the timber pile. The soft shell had an average thickness of 21 mm, but it did not contribute significantly to the structural strength of the piles. This study could present a template for assessing the remaining service life not only of historic quay walls but also of other timber pile foundations under bending loads.

Journal of Structural EngineeringVol. 151(1)
Delft University of Technology (NL)
Sustainable cities and communities
Openalex Percentile: Top 25%
Civil and Structural Engineering Research
1.04
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.