Combining energy generation and radiant systems: Challenges and possibilities for plus energy buildings

• Operating temperature levels of radiant systems are suitable for RES integration. • Integration also with TABS and PCM reduces peak loads, thus plant sizes. • PCM and radiant can shift the electric energy consumption during off-peak periods. • Some assets of RHC and RES resulted in slow response time solvable with proper control. • RHC and RES coupling supports decarbonization strategies, PEB and energy communities. Radiant heating and cooling (RHC) systems are being more widely adopted considering the well-known technical advantages: increased thermal comfort, space saving, and reduced energy use. Since the building sector is currently one of the largest consumers of fossil fuels, many directives and regulations have been enacted to address the intense concern about energy use for space conditioning. Even though radiant systems are considered as an energy efficient technology for building heating and cooling, more effort is needed to fulfil the zero energy requirements outlined by recent standards and directives. Renewable Energy Sources (RES) are an effective solution to avoid using finite fossil fuels and related geopolitical issues enhanced by the recent world conflicts. Despite being primarily intermittent and subject to economic and regional constraints, RES offer suitable temperature levels to supply low temperature heating and high temperature cooling operation, a major advantage of RHC system. Although a limited number of studies directly report energy savings or CO 2 emission reduction as the main outcomes of the research related to this combination, valuable insights have been obtained for the present review. Primary energy can decrease between 40% and 80% with different integration of RHC, photovoltaic, heat pumps and district heating. TABS can lead to load shifting up to 100%, allowing an increased self −consumption of renewable energy. This paper provides evidence on whether coupling radiant systems with renewables is a promising strategy for achieving nearly-zero annual energy balances in building stocks. It investigates recent trends, limitations and potential to support decarbonization goals.