Synthesis and Characterization of TiO2 Nanotubes for High-Performance Gas Sensor Applications

In this study, we investigated the fabrication, properties, and sensing applications of TiO2 nanotubes. A pure titanium metal sheet was used to demonstrate how titanium dioxide nanotubes can be used for gas-sensing applications through the electrochemical anodization method. Subsequently, X-ray diffraction indicated the crystallization of the titanium dioxide layer. Scanning electron microscopy and transmission electron microscopy then revealed the average diameter of the TiO2 nanotubes to be approximately 100 nm, with tube lengths ranging between 3 and 9 µm and the thickness of the nanotube walls being about 25 nm. This type of TiO2 nanotube was found to be suitable for NO2 gas sensor applications. With an oxidation time of 15 min, its detection of NO2 gas showed a good result at 250 °C, especially when exposed to a NO2 gas flow of 100 ppm, where a maximum NO2 gas response of 96% was obtained. The NO2 sensors based on the TiO2 nanotube arrays all exhibited a high level of stability, good reproducibility, and high sensitivity.