Study of the Activator Effects on the Specific Surface Area of Porous Carbon and its Performance as Lithium-Sulfur Battery Cathode

A study was conducted to investigate the effect of activator types KOH, ZnCl 2 , and H 3 PO 4 on the specific surface area of porous carbon and its performance as a Li-S battery. Porous carbon was synthesized from candlenut shells through a carbonization process at 700 °C using three types of activator solutions with a concentration of 0.36 M. The porous carbon activated with KOH achieved the best results, with a specific surface area of 681 m²g -1 . The porous carbon candlenut shell-sulfur (PCCS-S) composite was obtained by the solid-state reaction method in a ratio of 1:2.5 w% and heat-treated at 155 °C to form the PCCS-S composite. The PCCS-S composite was then made into a slurry and coated onto Al-foil to obtain a layer of electrodes with a thickness of 200 µm. The PCCS-S cathode was then assembled into a coin battery with lithium metal as the anode and an electrolyte of 1.0 M LiTFSi solution dissolved in 1,3-dioxolane (DOL) and 1,2-dimethoxyethane (DME) (v/v, 1:1). Charge-discharge characterization was carried out at a charge rate of 1 C for 50 cycles. Characterization shows that the performance of the PCCS-S KOH composite cathode Li-S battery is stable at a specific capacity of 324 mAhg -1 after the first 10 cycles, with an average Coulombic efficiency of around 86.8 %.