Synthesis of Porous Carbons from Candlenut Shells Using Various Types of Activators for Environmentally Friendly Supercapacitors

Porous carbon is one of the promising electrode materials for supercapacitors due to its unique and engineerable microstructural properties. The study of the synthesis of porous carbon from waste biomass is very important due to the abundance of natural resources, low cost production and contribute to solving environmental problems. In this study, porous carbons derived from candlnut shell with various type of activator was studied the chemical structural, morphological and electrochemical properties then evaluated as electrodes for supercapacitor. We have been successfully synthesized of porous carbon from candlenut shells using three steps of the process, i.e.: carboni-zation, activation and calcination. Carbonization was carried out at 700°C in a furnace using a closed crucible to minimize the oxygen. The chemical activation conducted using three types of activators, i.e. ZnCl 2 , H 3 PO 4 and KOH then calcination process by heated at 800°C for 1 h under Ar flow. The results of the Fourier-transform infrared (FTIR) analysis show that the carbonization process increases the content of aromatic C=C functional groups and reduce the OH, C-H, C-O and C=O functional groups. The carbonization process has also increased the electrical conductivity of the sample around 0.8525 S/m. The results of Scanning Electron Microscope (SEM) images can be observed that the activation process of carbon has formed which was indicated by the appearance of many pores on the surface area of carbon. N 2 adsorption/desorption isotherms (Brunauer–Emmett–Teller (BET)) characterization was indicated that the porous carbon is dominated by mesoporous with a pore size around 2-50 nm. BET characterization also can be determined the surface area of porous carbon around 477 m 2 /g for ZnCl 2 , 636 m 2 /g for H 3 PO 4 , and 681 m 2 /g for KOH. This synthesized materials are further employed in a symmetric supercapacitor using simple glass cell. The best performance of supercapacitor achieved by KOH porous carbons with 16.30 F/g of specific capacitance, 2.26 Wh/kg of energy density and 1038 W/kg of power density.