Producing Activated Biochar from the Reuse of Discarded Coffee Grounds with Enhanced Adsorptive Features Explored Towards the Stripping Voltammetric Sensing of Copper (II)

Abstract This work aims to allocate coffee grounds waste to the production of biochar from pyrolysis under different temperatures (350 °C and 500 °C), to add value to it. The resulting materials were characterized by immediate, elemental, thermogravimetric analysis, SEM, FT‐IR, XRD and Raman spectroscopy. Additionally, the need to activate the biochar produced for the desired use was evaluated. The obtained biochars were applied in electroanalysis in the manufacture of modified carbon paste electrodes. This choice was made due to the possibility of reaching a high sensitivity towards the determination of Cu 2+ ions. The differential pulse adsorptive anodic stripping voltammetry technique was applied to perform the Cu 2+ determination and, in this case, several parameters were optimized, including biochar’ percentage, pH of pre‐accumulation step and reduction/stripping step, pre‐accumulation time, potential and time of reduction of adsorbed‐Cu 2+ . From this, the proposed modified electrode showed a linear voltammetric response towards Cu 2+ in the range of 66.1 to 3997.3 ppb, with a limit of detection of 31.8 ppb, in addition to having been satisfactorily applied in the analysis of water samples (recoveries close to 100 %). Thus, demonstrating the potential for reuse of discarded coffee grounds for the preparation of activated biochar with outstanding electrochemical performance.