Catalytic Ammonia Synthesis by Supported Molybdenum Nitride: Insight into the Support Effect

Abstract The influence of the support on the performance of Mo nitrides has been investigated in ammonia synthesis and decomposition. A series of Mo–N catalysts supported on different materials, namely SiO 2 (commercial, SBA‐15), Al 2 O 3 , and CeO 2 , were prepared. The results indicated that, despite the high dispersion of Mo species in all catalysts, large disparities in the activity for ammonia synthesis exist. Initial rates of ∼1208, ∼481, and ∼372 µmol g active phase −1 h −1 are obtained over 10‐Mo–N/SBA‐15, 10‐Mo–N/SiO 2 , and 10‐Mo–N/Al 2 O 3 respectively. However, no catalytic activity was registered when Mo species were supported on CeO 2 . Furthermore, 10‐Mo–N/Al 2 O 3 deactivated after few hours of reaction. The surface composition was studied by means of XPS to probe the origin of the catalytic activity differences, and the results indicated that a range of various oxidation states of Mo was detected depending on the support. The difference in catalytic behavior could not be solely explained by the differences in Mo–N species concentrations. In situ EPR analysis exhibited that the mechanism of MoO 3 nitridation could differ depending on the support, leading to the formation of different Mo–N species. The effect of support was, however, not as severe in ammonia decomposition as it was the case of ammonia synthesis.