Geometric Evaluation of an Oscillating Water Column Wave Energy Converter Device Using Representative Regular Waves of the Sea State Found in Tramandaí, Brazil

Aiming to contribute to studies related to the generation of electrical energy from renewable sources, this study carried out a geometric investigation of an oscillating water column (OWC) wave energy converter (WEC) device. The structure of this device consists of a hydropneumatic chamber and an air duct, where a turbine is coupled to an electrical energy generator. When waves hit the device, the air inside it is pressurized and depressurized, causing the air to flow through the duct, activating the turbine. In this sense, the present study used the constructal design method to evaluate the influence of the ratio between the height and length of the hydropneumatic chamber (H1/L) on the mean available hydropneumatic power (PH(RMS)). Fluent software was used to perform numerical simulations of representative regular waves from the sea state in the municipality of Tramandaí, southern Brazil, impacting the OWC. Thus, it was possible to identify the geometry that maximized the performance of the OWC WEC, with (H1/L)O=0.3430, yielding PH(RMS)=56.66 W. In contrast, the worst geometry was obtained with H1/L=0.1985, where PH(RMS)=28.19 W. Therefore, the best case is 101% more efficient than the worst one.