Simulation and Deformation Analysis of Construction Process of Large Eccentric Frame‐Core Tube Structure

ABSTRACT The large eccentric frame‐core tube structure may generate nonnegligible horizontal deformation in the eccentric direction during the construction process, which should be given due attention. The construction process of a 388‐m‐high super high‐rise structure was simulated with the effects of concrete properties and construction processes. The reinforcement effect of steel bar in reinforced concrete shear wall and the hoop effect of steel tube in concrete filled steel tube (CFST) columns were considered by using the two‐cell simulation method, respectively. The accuracy of the finite element model was effectively verified based on the measured data under different construction process. The results show that the construction process has a large influence on both the vertical and horizontal deformation. The measures of construction leveling effectively reduce the vertical and horizontal deformation of super high‐rise structures, which is important for controlling the structural deformation. The proportion of creep‐shrinkage deformation in the total deformation is large. In this case, the proportion of creep‐shrinkage deformation in the shear wall is 45% to 50%, whereas it is about 30% in the frame columns. The eccentricity caused by floor slab gravity will be mitigated if the construction of the frame slab lags behind the construction of the steel frame, which is beneficial to the control of the horizontal structural deformation. After construction completion, the deformation caused by nonload factors is limited compared to the deformation caused by live loads.