The effect of the floor-wall interaction on the post-elastic rocking behaviour of segmented CLT shear walls

This paper investigates the impact of floor-wall interaction on the lateral rocking behaviour of two-panel segmented Cross-Laminated Timber (CLT) shear walls through experimental testing and numerical analyses. The study extends a simplified equivalent spring modelling approach to the post-elastic domain to accurately simulate the effects of floor-wall interaction. Experimental withdrawal tests on four types of floor-to-wall connections, utilizing Fully Threaded Screws (FTSs) and Partially Threaded Screws (PTSs) at varying inclinations, revealed that FTSs exhibited higher stiffness and load-carrying capacity but lower deformation capacity compared to PTSs. The maximum force of FTS connections was about twice that of PTS connections, while PTS connections achieved ultimate displacements up to seven times greater. Numerical analyses using a parametric framework showed that floor-wall interaction increases the stiffness and lateral load-carrying capacity of segmented shear walls, with a significant reduction in deformation capacity. These analyses also demonstrated that the equivalent spring can effectively replicate the influence of floor-wall interaction on shear wall lateral response. Expressions for calculating the strength and ductility of this equivalent spring were developed, considering a limited set of geometric and mechanical parameters. These expressions provide a simplified yet accurate method for estimating the effects of floor-wall interaction. The findings suggest that understanding the interaction between floor and wall elements is crucial for optimizing the performance of segmented CLT shear walls in seismic and lateral load scenarios. • The effect of the floor-wall interaction on the post-elastic rocking behaviour of segmented CLT shear walls is investigated. • Experimental tests on typical screwed CLT floor-to-wall connections are carried out. • Numerical parametric analyses at floor and wall level are conducted. • A simplified non-linear equivalent spring is proposed to simulate the floor-wall interaction mechanism.