Research on the distribution of debris flow impact on the upstream surface of the check dam

The impact force of debris flow is not only an important indicator of the risk assessment of debris flow and the strength impact resistance of buildings against debris flow, but also an important parameter in the design of various debris flow prevention projects (such as the check dam and the drainage channel, etc.). The pressure sensors are arranged at different positions (monitoring points) on the upstream face of the check dam. By changing the slope of the drainage channel, the bulk density of debris flow and the slope gradient of the upstream face of the check dam, the time history curves of the impact force at the monitoring points under different experiment conditions are obtained. The characteristic value of the impact force of debris flow acting on the surface of the sand retaining dam is analyzed, and the evolution law of mean value and maximum value of impact force of debris flow at the same detection location with the above conditions is obtained. The mean value and maximum value of debris flow impact force at different detection locations under the same working condition are analyzed to obtain the evolution law of debris flow impact force at different locations, and then the distribution trend of debris flow impact force on the upstream face of the check dam is obtained. The research results provide scientific and reasonable theoretical basis and technical support for the stability analysis of the check dam, so as to better serve the disaster prevention and reduction of debris flow, which will improve the technical level of the debris flow prevention project to a certain extent.