Enhanced sinterability and mechanical strength of beta-type tricalcium phosphates ceramics through reaction sintering with hydroxyapatite

Beta-tricalcium phosphate (β-TCP) ceramics were fabricated via reaction sintering at 1100 °C, utilizing various phosphate salts and calcium compounds as raw materials. The sintering characteristics, reaction sintering behavior and mechanical properties of the resulting β-TCP ceramics were investigated. Reaction sintering with a Ca/P molar ratio of 1.50 consistently generated β-TCP. In addition, a notable variance in physical properties was observed contingent on the presence or absence of stoichiometric hydroxyapatite (HAp; Ca 10 (PO 4 ) 6 (OH) 2 ) in raw materials. Sintered bodies produced with HAp−β-Ca 2 P 2 O 7 (β-CPP), HAp− CaHPO 4 ·2H 2 O (DCPD) and HAp−(NH 4 ) 2 H(PO 4 ) all exhibited densification and enhanced mechanical strength, correlated with higher bulk densities. In contrast, conventional sintered bodies prepared from β-TCP and reaction sintered bodies prepared using β-CPP−Ca(OH) 2 or β-CPP−CaCO 3 were not as dense. Comprehensive assessments by thermogravimetry-differential thermal analysis, X-ray diffraction and scanning electron microscope together with the evaluation of shrinkage behavior were used to monitor the sintering of β-TCP with HAp. This process was found to involve thermal decomposition of HAp and crystal transitions leading to the formation and sintering of β-TCP with significant shrinkage. These findings underscore the efficacy of employing HAp as a raw material in reaction sintering. This technique allows the formation of sintered β-TCP bodies exhibiting exceptional sintering characteristics, superior bulk density and high mechanical strength.