Two‐Dimensional Solidification Simulation of <scp>PCM</scp> Molten Salt as a Thermal Energy Storage for Stirling Engine

ABSTRACT Thermal energy storage technologies have been widely used to mitigate intermittency from renewable energy sources such as solar energy. Phase change material (PCM) is a material that can be used as a heat storage medium and is available in a wide range of operating temperatures. Molten salt is one of the PCMs that has the advantage of a very high operating temperature. The PCM solidification simulation based on HitecXL molten salt using COMSOL Multiphysics software was carried out with variations in heat absorption of 1–5 kW/m 2 , assuming constant heat absorption. The results showed that the PCM solidification process started from the surface of the Stirling engine heat exchanger pipe. The part of the PCM that is solidified falls due to gravity, causing a phenomenon similar to a droplet. The flow that occurred was natural, driven by the buoyancy force resulting from density changes due to temperature gradients in the solidification process. The time required for the PCM to completely solidify was closely related to the amount of heat absorption; the greater the heat absorption from the pipe, the faster the PCM is fully solidified.