Blade Airfoil Optimization and Its Impact on Vertical Axis Wind Turbine Performance

Abstract Amidst the emergence of crises in petroleum prices and supply, the imperative for the development of clean energy has become increasingly apparent. Vertical axis wind turbines (VAWT), as a type of wind turbine, still grapple with challenges such as low wind energy utilization and sensitivity to dynamic wind speeds. This study focuses on optimizing the airfoil of a two-dimensional vertical axis wind turbine and analyzes the performance variations in a three-dimensional model. Following the optimization, the average power coefficients of the dual-blade two-dimensional VAWT increased by 7.9% and 4%, respectively, while those of the dual-blade three-dimensional model rose by 7.9% and 1.2%. However, the performance of the three-dimensional model was compromised due to the influence of tip vortices, resulting in inferior performance compared to the two-dimensional model. Both three-dimensional optimized blade designs exhibited a substantial reduction in the flow separation region downstream and improved pressure distribution fluctuations caused by the shedding of tip vortices, leading to decreased pressure differentials. Along the spanwise section, the power coefficient gradually decreased from the central segment to the tip segment. Notably, the power coefficient of the optimized blades at the tip segment increased significantly, accompanied by an augmented pressure differential between the upper and lower surfaces. This augmentation contributed to a significant enhancement in lift, thereby facilitating the rotation of the vertical axis wind turbine.