Effect of different heat inputs on the microstructure and mechanical properties of the laser welded joint of CLF-1 steel

Abstract In this study, we examined the effects of various heat inputs on the microstructure and mechanical properties of the laser-welded joints of CLF-1 low-activation ferritic/martensitic steel medium-thick plates, which are used in the Test Blanket Module (TBM). The results indicate that under four different welding heat inputs (2727 J/cm, 3000 J/cm, 3563 J/cm, and 4500 J/cm), the weld microstructure is primarily composed of a large amount of lath martensite and a small amount of δ-Fe. As the heat input increases, the average width of lath martensite in the weld microstructure progressively increases, while the average volume fraction and width size of δ-Fe experience a significant increase. When the heat input surpasses 3563 J/cm, δ-Fe exhibits a dense aggregation. The tensile properties of the joints created under different heat inputs are superior to those of the base material. At the lowest heat input, the maximum impact toughness of the weld reaches 40 J.