Triple‐structured <scp>polyvinylidene fluoride</scp>‐based composite films with high conductivity and <scp>EM</scp> shielding properties

Abstract Functionalized thin films with excellent flexibility and conductivity can meet the current requirements for electromagnetic(EM) shielding materials. In this paper, 2D transitions metal carbide and nitride nanomaterials Ti 3 C 2 T x MXene were prepared by chemical exfoliation, and PVDF/MWCNTs/3 wt%/RGO@Fe 3 O 4 @ AgNWs‐10 based on PVDF/MWCNTs‐3 wt%/RGO@Fe 3 O 4 @AgNWs‐10, The samples were prepared through a simple solution mixing process followed by vacuum‐assisted filtration (VAF), and PVDF/MWCNTs/MXene/RGO@Fe 3 O 4 @AgNWs three‐layer PVDF‐based composite films, which were analyzed for electrical conductivity and EM shielding properties, which increased and then decreased with the rise in the Ti 3 C 2 T x MXene content, in which the highest electrical conductivity of the three‐layer composite films of M3/MX‐10/R@F@Ag was obtained when the Ti 3 C 2 T x MXene addition amount reached 10 mL as 3.9 × 10 3 S/m, the EMI SE T is 54.9 dB, the EMI SE A is 44.8 dB, the absorption loss is 81.6%, and the SSEt of the M3/MX‐10/R@F@Ag three‐layer composite film is the highest 1672.5 dB/(cm −2 ·g). And the SE A /SE R ratios of the M3/MX‐X/R@F@Ag three‐layer composite films are all greater than 1. The result shows that the EM attenuation mechanism of the M3/MX‐X/R@F@Ag three‐layer composite films is primarily driven by absorption loss and that the incorporation of Ti3C2T x Mxene improves the EM shielding performance of the composite films. The relatively novel exploration of the performance study and structural design of the M3/MX‐X/R@F@Ag three‐layer EM shielding composite film provides structural design and research ideas for the application of the new MXenes material in EM shielding composites. Highlights The addition of Ti 3 C 2 T x MXene will generate more conductive network nodules A complete 3D conductive network is constructed in the membrane This paper discusses the influence of Ti3C2Tx MXene on EM shielding Multiple internal reflections of EMW between Ti 3 C 2 T x MXene 2D nanosheets The EM shielding mechanism of the film is discussed from the angle of 3D

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2024-10-25
DOI
https://doi.org/10.1002/pc.29168
Citations
5
Primary Topic
Electromagnetic wave absorption materials
Type
article
Field-Weighted Citation Impact
0.59
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Triple‐structured polyvinylidene fluoride‐based composite films with high conductivity and EM shielding properties

Daohai Zhang, Xiao Zhan, Jingyu Du, Yuhuan Xu et al.
5 citations
Polymer Composites
Electromagnetic wave absorption materials
0.59
article

Triple‐structured polyvinylidene fluoride‐based composite films with high conductivity and EM shielding properties

Daohai Zhang, Xiao Zhan, Jingyu Du, Yuhuan Xu, Shuhao Qin, Teng Zhou, Yanyan Tan, Renyuan Yang, Kunlan Diao
article en
5 citations

Abstract

Abstract Functionalized thin films with excellent flexibility and conductivity can meet the current requirements for electromagnetic(EM) shielding materials. In this paper, 2D transitions metal carbide and nitride nanomaterials Ti 3 C 2 T x MXene were prepared by chemical exfoliation, and PVDF/MWCNTs/3 wt%/RGO@Fe 3 O 4 @ AgNWs‐10 based on PVDF/MWCNTs‐3 wt%/RGO@Fe 3 O 4 @AgNWs‐10, The samples were prepared through a simple solution mixing process followed by vacuum‐assisted filtration (VAF), and PVDF/MWCNTs/MXene/RGO@Fe 3 O 4 @AgNWs three‐layer PVDF‐based composite films, which were analyzed for electrical conductivity and EM shielding properties, which increased and then decreased with the rise in the Ti 3 C 2 T x MXene content, in which the highest electrical conductivity of the three‐layer composite films of M3/MX‐10/R@F@Ag was obtained when the Ti 3 C 2 T x MXene addition amount reached 10 mL as 3.9 × 10 3 S/m, the EMI SE T is 54.9 dB, the EMI SE A is 44.8 dB, the absorption loss is 81.6%, and the SSEt of the M3/MX‐10/R@F@Ag three‐layer composite film is the highest 1672.5 dB/(cm −2 ·g). And the SE A /SE R ratios of the M3/MX‐X/R@F@Ag three‐layer composite films are all greater than 1. The result shows that the EM attenuation mechanism of the M3/MX‐X/R@F@Ag three‐layer composite films is primarily driven by absorption loss and that the incorporation of Ti3C2T x Mxene improves the EM shielding performance of the composite films. The relatively novel exploration of the performance study and structural design of the M3/MX‐X/R@F@Ag three‐layer EM shielding composite film provides structural design and research ideas for the application of the new MXenes material in EM shielding composites. Highlights The addition of Ti 3 C 2 T x MXene will generate more conductive network nodules A complete 3D conductive network is constructed in the membrane This paper discusses the influence of Ti3C2Tx MXene on EM shielding Multiple internal reflections of EMW between Ti 3 C 2 T x MXene 2D nanosheets The EM shielding mechanism of the film is discussed from the angle of 3D

Polymer CompositesVol. 46(4)
Guizhou Minzu University (CN), National Engineering Research Center for Compounding and Modification of Polymer Materials (CN)
Openalex Percentile: Top 39%
Electromagnetic wave absorption materials
0.59
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.