Potential Sites for Rainwater Harvesting Focusing on the Sustainable Development Goals Using Remote Sensing and Geographical Information System

An innovative way to combat water scarcity brought on by population increase and climate change is rainwater harvesting (RWH), particularly in arid and semiarid areas. Currently, Pakistan is facing major water issues due to underprivileged water resource management, climate change, land use changes, and the sustainability of local water resources. This research aims to find out the suitable sites and options for RWH structures in the Quetta district of Pakistan by integrating the depression depth technique, Boolean analysis, and weighted linear combination (WLC) with hydrological modeling (HM), multicriteria analysis (MCA), a geographic information system (GIS), and remote sensing (RS). To find suitable sites for RWH, a collection of twelve (12) thematic layers were used, including the slope (SL), land use land cover (LULC), subarea (SA), runoff depth (RD), drainage density (DD), lineament density (LD), infiltration number (IFN), distance from built-up area (DB), distance from roads (DR), distance from lakes (DL), maximum flow distance (MFD), and topographic wetness index (TWI). The Boolean analysis and WLC approach were integrated in the GIS environment. The consistency ratio (CR) was calculated to make sure the assigned weights to thematic layers were consistent. Overall, results show that 6.36% (167.418 km2), 14.34% (377.284 km2), 16.36% (430.444 km2), 18.92% (497.663 km2), and 18.64% (490.224 km2) of the area are in the categories of very high, high, moderate, low, and very low suitability, respectively, for RWH. RWH potential is restricted to 25.35% (666.86 km2) of the area. This research also identifies the five (5) best locations for checking dams and the ten (10) best locations for percolation tanks on the streams. The conducted suitability analysis will assist stakeholders in selecting the optimal locations for RWH structures, facilitating the storage of water, and addressing the severe water scarcity prevalent in the area. This study proposes a novel approach to handle the problems of water shortage in conjunction with environmental and socioeconomic pressures in order to achieve the sustainable development goals (SDGs).

Authors

Institutions

Publication Details

Journal
Sustainability
Published
2024-10-25
DOI
https://doi.org/10.3390/su16219266
Citations
15
Primary Topic
Soil and Land Suitability Analysis
Type
article
Field-Weighted Citation Impact
10.65

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Potential Sites for Rainwater Harvesting Focusing on the Sustainable Development Goals Using Remote Sensing and Geographical Information System

Muhammad Waseem, Ghulam Nabi, Muhammad Masood, Muhammad Atiq Ur Rehman Tariq et al.
15 citations
Sustainability
Soil and Land Suitability Analysis
10.65
article

Potential Sites for Rainwater Harvesting Focusing on the Sustainable Development Goals Using Remote Sensing and Geographical Information System

Muhammad Waseem, Ghulam Nabi, Muhammad Masood, Muhammad Atiq Ur Rehman Tariq, Adnan Abbas, Mudassar Iqbal, S. M. Akram Ullah, Muhammad Sadam
article en
15 citations

Abstract

An innovative way to combat water scarcity brought on by population increase and climate change is rainwater harvesting (RWH), particularly in arid and semiarid areas. Currently, Pakistan is facing major water issues due to underprivileged water resource management, climate change, land use changes, and the sustainability of local water resources. This research aims to find out the suitable sites and options for RWH structures in the Quetta district of Pakistan by integrating the depression depth technique, Boolean analysis, and weighted linear combination (WLC) with hydrological modeling (HM), multicriteria analysis (MCA), a geographic information system (GIS), and remote sensing (RS). To find suitable sites for RWH, a collection of twelve (12) thematic layers were used, including the slope (SL), land use land cover (LULC), subarea (SA), runoff depth (RD), drainage density (DD), lineament density (LD), infiltration number (IFN), distance from built-up area (DB), distance from roads (DR), distance from lakes (DL), maximum flow distance (MFD), and topographic wetness index (TWI). The Boolean analysis and WLC approach were integrated in the GIS environment. The consistency ratio (CR) was calculated to make sure the assigned weights to thematic layers were consistent. Overall, results show that 6.36% (167.418 km2), 14.34% (377.284 km2), 16.36% (430.444 km2), 18.92% (497.663 km2), and 18.64% (490.224 km2) of the area are in the categories of very high, high, moderate, low, and very low suitability, respectively, for RWH. RWH potential is restricted to 25.35% (666.86 km2) of the area. This research also identifies the five (5) best locations for checking dams and the ten (10) best locations for percolation tanks on the streams. The conducted suitability analysis will assist stakeholders in selecting the optimal locations for RWH structures, facilitating the storage of water, and addressing the severe water scarcity prevalent in the area. This study proposes a novel approach to handle the problems of water shortage in conjunction with environmental and socioeconomic pressures in order to achieve the sustainable development goals (SDGs).

SustainabilityVol. 16(21)
University of Engineering and Technology Lahore (PK), Hohai University (CN), Jilin University (CN), Charles Darwin University (AU), Anhui Polytechnic University (CN)
Hohai University
Openalex Percentile: Top 2%
Soil and Land Suitability Analysis
10.65
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.