Catalytic Degradation of Bisphenol A in Water by Non-Thermal Plasma Coupled with Persulfate

Bisphenol A (BPA) has become prevalent in the environment due to its extensive use in industrial materials, thus raising significant concerns regarding its potential toxicity and health effects. In this study, an efficient and eco-friendly non-thermal plasma (NTP) was used to catalyze persulfate (PS) for BPA decomposition, and the results showed that the integrated system could effectively degrade BPA. The best performance was attained at a PS to BPA mass ratio of 5:1, with a degradation rate of 91.3% following a 30 min treatment. The degradation rate of BPA increased with increasing input voltage and frequency; conversely, it decreased with an increase in BPA’s initial concentration. Higher BPA degradation rates could be achieved in alkaline environments. Radical quenching experiments revealed that SO4−•, OH•, O2−• and 1O2 were important active substances involved in BPA degradation. Nine intermediate products were identified by liquid chromatography–mass spectrometry (LC-MS), and four degradation pathways were deduced. Additionally, a toxicity analysis of intermediate products was performed. The significant decrease in chemical oxygen demand (COD) during the actual wastewater treatment suggested that the NTP/PS system has good applicability in actual wastewater treatment.