Optimizing electrokinetic remediation for pollutant removal and electroosmosis/dewatering using lateral anode configurations

Soil electrokinetics (SEK) research has been widely used in various fields such as soil remediation, dewatering, land restoration, geophysics, sedimentation, pollution prevention, consolidation, and seed germination. According to our most recent published research on SEK process design modifications during the last 30 years (1993-2022), more than 150 designs have been introduced to assure SEK's maximum performance. Incorporating lateral electrodes/anodes was not documented in the existing literature, which motivated us to investigate the output of this design. In this study, we aimed to enhance the performance of the perforated cathode pipe soil electrokinetic remediation (SEKR) system (PCPSS) for removing inorganic pollutants by installing lateral anodes (LA-PCPSS) using two approaches. In the first approach, the LA-PCPSS was connected to different sources of applied voltages (DSAV) from different power supplies, while in the second approach, the entire operation system was connected to the same source of applied voltage (SSAV). We used the Taguchi approach (L<sub>9</sub>OA) to determine the optimal levels of applied voltages for the DSAV system. The results indicated that the DSAV-(LA-PCPSS) could be optimized at an applied voltage of 1 V cm<sup>-1</sup> for the surface and the first and second lateral anodes. The indigenous Sr (elements found in the tested soil without artificial pollution) in kaolinite showed the best response among other elements (Ni and other indigenous elements) when optimizing the DSAV-(LA-PCPSS) using the Taguchi approach. Installing lateral anodes (position B) supplied to low applied voltage (0.5 V cm<sup>-1</sup>) improved the electroosmosis (EO) rate/dewatering. Reverse migration of ions was observed during the remediation of real contaminated soil using the SSAV-(LA-PCPSS). The DSAV-(LA-PCPSS) is considered an appropriate design for the SEKR of inorganic pollutants, and increases the EO flow/dewatering. Additionally, the increased energy consumption employing the DSAV-(LA-PCPSS) was extremely minimal compared to the traditional PCPSS, which is an economic advantage for SEKR research. The DSAV-(LA-PCPSS) is still under optimization/intensification process, and subsequent processes will be examined to achieve high efficiency.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2024-10-25
DOI
https://doi.org/10.1038/s41598-024-75060-6
Citations
13
Primary Topic
Electrokinetic Soil Remediation Techniques
Type
article
Field-Weighted Citation Impact
2.71
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Optimizing electrokinetic remediation for pollutant removal and electroosmosis/dewatering using lateral anode configurations

Osama Abd-Elmottaleb, Ahmed Abou-Shady, Mohamed A. Osman, Asmaa K. Bahgaat et al.
13 citations
Scientific Reports
Electrokinetic Soil Remediation Techniques
2.71
article

Optimizing electrokinetic remediation for pollutant removal and electroosmosis/dewatering using lateral anode configurations

Osama Abd-Elmottaleb, Ahmed Abou-Shady, Mohamed A. Osman, Asmaa K. Bahgaat, Doaa Eissa
article en
13 citations

Abstract

Soil electrokinetics (SEK) research has been widely used in various fields such as soil remediation, dewatering, land restoration, geophysics, sedimentation, pollution prevention, consolidation, and seed germination. According to our most recent published research on SEK process design modifications during the last 30 years (1993-2022), more than 150 designs have been introduced to assure SEK's maximum performance. Incorporating lateral electrodes/anodes was not documented in the existing literature, which motivated us to investigate the output of this design. In this study, we aimed to enhance the performance of the perforated cathode pipe soil electrokinetic remediation (SEKR) system (PCPSS) for removing inorganic pollutants by installing lateral anodes (LA-PCPSS) using two approaches. In the first approach, the LA-PCPSS was connected to different sources of applied voltages (DSAV) from different power supplies, while in the second approach, the entire operation system was connected to the same source of applied voltage (SSAV). We used the Taguchi approach (L<sub>9</sub>OA) to determine the optimal levels of applied voltages for the DSAV system. The results indicated that the DSAV-(LA-PCPSS) could be optimized at an applied voltage of 1 V cm<sup>-1</sup> for the surface and the first and second lateral anodes. The indigenous Sr (elements found in the tested soil without artificial pollution) in kaolinite showed the best response among other elements (Ni and other indigenous elements) when optimizing the DSAV-(LA-PCPSS) using the Taguchi approach. Installing lateral anodes (position B) supplied to low applied voltage (0.5 V cm<sup>-1</sup>) improved the electroosmosis (EO) rate/dewatering. Reverse migration of ions was observed during the remediation of real contaminated soil using the SSAV-(LA-PCPSS). The DSAV-(LA-PCPSS) is considered an appropriate design for the SEKR of inorganic pollutants, and increases the EO flow/dewatering. Additionally, the increased energy consumption employing the DSAV-(LA-PCPSS) was extremely minimal compared to the traditional PCPSS, which is an economic advantage for SEKR research. The DSAV-(LA-PCPSS) is still under optimization/intensification process, and subsequent processes will be examined to achieve high efficiency.

Scientific ReportsVol. 14(1)
Desert Research Center (EG)
Life in Land
Openalex Percentile: Top 9%
Electrokinetic Soil Remediation Techniques
2.71
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.