Advances in Design and Fabrication of Micro-Structured Solid Targets for High-Power Laser-Matter Interaction

Accelerated particles have multiple applications in materials research, medicine, and the space industry. In contrast to classical particle accelerators, laser-driven acceleration at intensities greater than 1018 W/cm2, currently achieved at TW and PW laser facilities, allow for much larger electric field gradients at the laser focus point, several orders of magnitude higher than those found in conventional kilometer-sized accelerators. It has been demonstrated that target design becomes an important factor to consider in ultra-intense laser experiments. The energetic and spatial distribution of the accelerated particles strongly depends on the target configuration. Therefore, target engineering is one of the key approaches to optimizing energy transfer from the laser to the accelerated particles. This paper provides an overview of recent progress in 2D and 3D micro-structured solid targets, with an emphasis on fabrication procedures based on laser material processing. Recently, 3D laser lithography, which involves Two-Photon Absorption (TPA) effects in photopolymers, has been proposed as a technique for the high-resolution fabrication of 3D micro-structured targets. Additionally, laser surface nano-patterning followed by the replication of the patterns through molding, has been proposed and could become a cost-effective and reliable solution for intense laser experiments at high repetition rates. Recent works on numerical simulations have also been presented. Using particle-in-cell (PIC) simulation software, the importance of structured micro-target design in the energy absorption process of intense laser pulses—producing localized extreme temperatures and pressures—was demonstrated. Besides PIC simulations, the Finite-Difference Time-Domain (FDTD) numerical method offers the possibility to generate the specific data necessary for defining solid target material properties and designing their optical geometries with high accuracy. The prospects for the design and technological fabrication of 3D targets for ultra-intense laser facilities are also highlighted.