Performance simulation of solar-driven absorption heat pump-membrane distillation system for combined desalination brine concentration with feed recirculation and cooling applications

Desalination is the primary choice for securing freshwater provision in water-stressed regions and reduces the gap between rising demand and dwindling natural freshwater resources. However, global desalination plants are dominated by fossil fuel-driven desalination technologies with a 40–50 % recovery ratio. Hence, it is critical to decarbonize desalination and address brine effluent ecological concerns. In this paper, a solar-powered absorption heat pump (AHP)-membrane distillation (MD) system concept was proposed and analysed for small-scale RO plant brine reject management and space cooling applications. The MD subsystem is based on commercial MD modules with batch feed recirculation to reach saturation (from 70 to 260 g/kg salinity). The MD system's heating and cooling consumptions are supplied by the AHP (6.54 MWh and 13.47 MWh, respectively, for a complete batch cycle). The AHP is designed to supply hot water at 85 °C with 701.63 kW heating capacity and co-produced chilled water at 16 °C with a cooling capacity of 857.86 kW, about 67 % is utilized to cool down the brine reject to feed temperature. The thermal and exergy COPs were 1.273 and 0.40 at a driving heat of 135 °C. The solar-powered AHP-MD system is useful for sustainable desalination deployment besides space cooling applications. • AHP-MD system is proposed for RO reject brine management and cooling applications. • MD system operates in batch feed recirculation to reach saturation. • AHP provides heating and cooling (85 °C and 16 °C) outputs of 701.63 and 857.86 kW. • 67 % of AHP's cooling output is utilized for cooling down MD brine reject to 20 °C. • AHP operates at a combined thermal COP and exergy COP of 1.273 and 0.40.