Experimental analysis of the influence of PCM on the thermal behavior of lightweight buildings in different natural environments

Phase-change materials (PCM) can effectively improve the thermal performance of lightweight buildings, but their heat storage and release capacity are highly dependent on the heat exchange between the wall surface and the ambient environments. However, the current research mostly focuses on numerical simulation in a specific climate environment, and the effectiveness of PCM on the thermal regulation of lightweight buildings under a long-period natural environment is insufficient. Therefore, two experimental rooms (with and without PCM) of the same size were built and conducted in this paper to compare the changing rules of wall surface temperature, heat flux, and indoor temperature in different seasons without mechanical equipment. The results show that: (1) The effect of PCM on the thermal performance of lightweight buildings is highly correlated with seasons, and its contribution efficiency varies in different seasons; (2) The attenuation rate of the internal surface temperature in different seasons can be reduced by 18.08%–42.90 %, the delay time can be improved to 2.67–4 h compared with the reference wall; (3) PCM can effectively inhibit the fluctuation and rise of indoor temperature, which can reduce the maximum indoor temperature by 4.9–12.0 °C, increase the minimum temperature by 1.1–2.8 °C, and the thermal comfort hours added by 2–5 h; (4) Lightweight buildings incorporating PCM can saves 18.69 % and 49.63 % for the peak cooling in summer and transition seasons, and 15.9 % for the heating in winter. The research results can provide the theoretical basis and experimental support for the efficient application of PCM in lightweight buildings.