Numerical Optimization of Functionally Graded Ti-HAP Material for Tibial Bone Fixation System

Functionally graded materials (FGMs) are heterogeneous composites characterized by outstanding properties. They are built from two or more components with a gradient distribution of chemical composition along a given direction. A promising graded material for biomedical engineering as an implant could be a FGM made of titanium (Ti) and hydroxyapatite (HAP). It would allow us to counteract the difference between the stiffness modulus of pure titanium and bone tissue. Moreover, it can be a good solution to the problem of stress shielding for bone fixation plates made of conventional titanium or steel. The presented paper aims to perform micromechanical modeling and optimization of a functionally Ti-HAP graded plate, followed by numerical analysis of a fractured tibia stabilization system under specific boundary conditions. Finite element analysis was performed using ANSYS Workbench 2021 software. The models of the FGM plate and tibial fixation system were made using the Space Claim tool. The ANSYS software allowed the optimization of the model considered and the selection of the appropriate structural parameters of the FGM Ti-HAP material. In general, the results proved that the osteosynthesis plate built of graded Ti-HAP material resulted in lower bone stress compared to titanium and steel plates. The results obtained confirmed the validity of the design and the possibility to use functionally graded Ti-HAP bone fixation plates.