Construction of a prototype of the basic module of a scalable robotic system for simulation of composite surfaces for dynamic tests

The authors of the article developed a mathematical model of Stewart platform management. The angles of rotation of the servo shafts were obtained when setting various laws of motion of the mobile platform, in matrix mode. The hardware part of the prototype of the basic module of a scalable robotics system for modeling composite surfaces for dynamic tests was developed. The results of calculations of the maximum permissible load on the shafts of servos are presented. The CubeIDE settings for programming the STM32 microcontroller are given. The results of software development for the control of this prototype were obtained, namely, a library for controlling 6 servo drives under driver control was written. The problems that may arise during the above-described developments by future developers are considered, solutions to these problems are obtained. Detailed design features of this prototype are described, the control code of the servo drive is given; steps for further development of the final robotic system are considered