High-Temperature Deformation Behaviour of UNS S32750 Super Duplex Stainless Steel (SDSS) Alloy

In this study, the high-temperature deformation behaviour of the UNS S32750 Super Duplex Stainless Steel (SDSS) alloy was investigated by means of deformability and microstructure evolution in the (1050-1200) °C temperature (T) range. The deformability of the UNS S32750 SDSS alloy was investigated by the up-setting method using a gravity-drop hammer, with the following deformation energy/impact energy (E∗): 545.2 J, 1021.5 J, 1480.6 J, and 1905.3 J. Data referring to deformation resistance (σc') and mechanical work (A∗) as a function of deformation temperature (T) and deformation energy/impact energy (E∗) were obtained and analysed. It was shown that increasing the deformation temperature leads to an increase in the obtained deformation degree (degree of reduction in height). By analysing the rate of increase in the deformation degree as a function of the applied impact energy, it was shown that the rate of increase in the deformation degree rises with the increase in the applied impact energy. Also, it was observed that the evolution of the deformation resistance (σc') as a function of temperature (T) shows a decreasing tendency while increasing the deformation temperature for all impact energies and that the evolution of the mechanical work (A∗) as a function of temperature (T) shows a decreasing tendency while increasing the deformation temperature for all impact energies. The microstructure evolution of the UNS S32750 SDSS alloy was investigated by X-ray diffraction (XRD) and Scanning Electron Microscopy-Electron Backscatter Diffraction (SEM-EBSD) techniques. It was observed that, in all cases, the microstructure shows intensely deformed grains, strongly elongated in the rolling direction in both ferrite (δ) and austenite (γ) intensely deformed grains. The intensity of grain deformation is increasing with the increase in the applied deformation degree. Also, it was observed that increasing the deformation temperature leads to a strong increase in the weight fraction of the dynamically recrystallised (DRX) ferrite (δ) grains.