Influence of Transverse Normal Strain on Buckling and Vibration of Sandwich Plates

This study presents the buckling and free vibration behavior of simply supported square and rectangular sandwich plates. A third-order shear deformation theory considering both the transverse shear and normal deformations is used. The condition of zero transverse shear stresses on the top and bottom surfaces of the plate is satisfied. Hence, the present theory does not require the shear correction factor generally associated with the first-order shear deformation theory. Governing equations and boundary conditions are obtained using the principle of minimum potential energy. The closed-form solutions of simply supported sandwich plates are obtained. The effect of the side-to-thickness ratio and plate aspect ratio on buckling and free vibration responses of simply supported square and rectangular sandwich plates is examined. Parametric effects of face sheet thickness ratios and load factor upon the critical buckling load for uniaxial and biaxial buckling analysis of square and rectangular sandwich plates for different staking sequences are studied. All numerical solutions are obtained using MATLAB ® programs. The results obtained from the present theory are compared with those from classical plate theory, first-order shear deformation theory, higher-order shear deformation theories, and the exact three-dimensional elasticity solutions as applicable.