Can mussel shell waste optimize cement and air lime mortars hygrothermal performance?

Mussel shells used as aggregates for mortars have flaky and irregular particles, which significantly increases the pore volume. This leads to the identification the microstructure of mussel shell mortars as a light and porous composite, which could have good hygrothermal properties. In the present study, the density and thermal properties are assessed on cement and air lime mortars, each with three replacement percentages of replacement of conventional sand by mussel shell sand (25 %, 50 % and 75 %), are evaluated and compared with their respective baselines (0 % replacement). Thermal conductivity measurements are also carried out on different loose fractions of the mussel shell aggregate to understand the behaviour of this material without binder matrix. Finally, adsorption and desorption cycles at 80 % and 50 % relative humidity are carried out on loose aggregate fractions and on the eight mortars. The results are very positive for the mussel shell mortars, as it can be concluded that the use of mussel shell aggregates improves the thermal performance and the potential moisture buffering capacity of both cement and air-lime coating mortars. • Cement and air lime putty mortars are produced with mussel shell recycled sand partially replacing common sand. • Thermal conductivity decreases due to increased pore volume. • Hygroscopic capacity increases due to the higher hygroscopicity of the recycled sand. • The bio-waste is valorised with environmental benefits. • The bio-mortars can have a significant passive contribution for buildings comfort and energy efficiency.