Production and Characterization of Hybrid Al6061 Nanocomposites

Aluminum-based hybrid nanocomposites, namely the Al6061 alloy, have gained prominence in the scientific community due to their unique properties, such as high strength, low density, and good corrosion resistance. The production of these nanocomposites involves incorporating reinforcing nanoparticles into the matrix to improve its mechanical and thermal properties. The Al6061 hybrid nanocomposites were manufactured by conventional powder metallurgy (cold pressing and sintering). Ceramic silicon carbide (SiC) nanoparticles and carbon nanotubes (CNTs) were used as reinforcements. The nanocomposites were produced using different reinforcement amounts (0.50, 0.75, 1.00, and 1.50 wt.%) and sintered from 540 to 620 °C for 120 min. The characterization of the Al6061 hybrid nanocomposites involved the analysis of their mechanical properties, such as hardness and tensile strength, as well as their micro- and nanometric structures. Techniques such as optical microscopy (OM) and scanning electron microscopy (SEM) with electron backscatter diffraction (EBSD) were used to study the distribution of nanoparticles, the grain size of the microstructure, and the presence of defects in the matrix. The microstructural evaluation revealed significant grain refinement and greater homogeneity in the hybrid nanocomposites reinforced with 0.75 wt.% of SiC and CNTs, resulting in better mechanical performance. Tensile tests showed that the Al6061/CNT/SiC hybrid composite had the highest tensile strength of 104 MPa, compared to 63 MPa for the unreinforced Al6061 matrix. The results showed that adding 0.75% SiC nanoparticles and CNTs can significantly improve the properties of Al6061 (65% in the tensile strength). However, some nanoparticle agglomeration remains one of the challenges in manufacturing these nanocomposites; therefore, the expected increase in mechanical properties is not observed.