Investigation of the biological removal of nickel and copper ions from aqueous solutions using mixed microalgae

Abstract The use of mixed microalgae offers an effective solution for the management of contamination risks in cultivation while enhancing economic viability. In this study, mixed microalgae were used for the first time for the removal of copper (Cu) and nickel (Ni) from aqueous solutions. The characteristics of the adsorbents were examined thoroughly, and the adsorption process was assessed using isotherms, kinetics, and thermodynamics. Particle size, concentration, contact time, temperature, and pH were among the variables assessed. The findings demonstrated that, at an initial concentration of 100 mg L –1 and a pH of 6, the maximum adsorption of Cu with a particle size of 1 mm (90.20%) took place in 60 min. The highest adsorption rate (78.25%) was found for Ni. Microalgae performed best over 180 min at room temperature and at pH values that promoted metal dissolution. The removal percentages of wet and dried microalgae were comparable, and the wet adsorbent was more economical. It was feasible to remove both metals at the same time. Up to three cycles of adsorbent reuse were possible, with sodium hydroxide treatment offering superior removal to hydrochloric acid. Thermodynamic analysis demonstrated that this process, which results in a disordered state, is exothermic and spontaneous.