Effect of Welding Process of the Microstructure and Mechanical Properties of Weld Zone of Steel for Ship Structure B Gr. Steel

The microstructurale and mechanical properties of B Gr. steel were evaluated for shipbuilding according to a welding process. The following conclusions were drawn. In tandem submerged arc welding(TSAW), compared to single submerged arc welding(SAW), the grain boundary ferrite was coarsened, and the fraction was higher owing to the high heat input and low flux basicity ; conversely, the volume fraction of acicular ferrite was lower. Fine intragranular acicular ferrite and polygonal ferrite were observed in the weld metal of the electrogas welding (EGW), which had the highest heat input. In the microstructure near the fusion line, as the amount of heat input increased, the prior austenite grain boundary became coarse. Further, both the intergranular grainboundaryferrite and intragranular bainite became coarse, and the heat-affected zone became wider. The hardness of weld metal was independent of the amount of heat input and was demonstrated to be high in the order of EGW, single SAW, and TSAW owing to the microstructure difference caused by the chemical composition of the filler material and the dilution rate of the base metal. Furthermore, the tensile strength of all three welding processes resulted in stable satisfaction with the class society rules.