Excellent combinations of strength-ductility and corrosion resistance in SAF 2205 duplex stainless steel with multi-scale grain distribution

In this work, a multi-scale grain structure was obtained in SAF 2205 duplex stainless steel (DSS) by severe deformation and short-term annealing process . The influence of this structure on the mechanical properties and electrochemical behavior is systematically investigated. Experimental results indicate that the sample subjected to short-term annealing at 1000 °C (SA-1000 °C) exhibits the best comprehensive properties, with a yield strength (YS) of 652.6 MPa and an elongation (EL) of 39.9 %. Both strength and ductility surpass those of the original sample and long-term annealed (LA-1000 °C) samples. The strength-ductility product is increased by 32 % compared to the original sample and by 18 % compared to the LA-1000 °C sample. The increase in YS is predominantly attributed to dislocation strengthening and grain refinement strengthening, and the heterogeneous microstructure leads to good ductility. Moreover, the multi-scale distribution of the grain structure exhibits enhanced corrosion resistance due to the increased low-Σ grain boundaries and the promotion of stable passivation film formation by a limited number of defects, thereby mitigating the corrosion rate . • A microstructure with non-uniform multi-scale grains was achieved, offering an optimal balance of strength and ductility. • Strength-ductility synergy comes from dislocations, grain refinement, and strain partitioning across phases and grain sizes. • The uneven grain size distribution, more low-Σ grain boundaries, and fewer defects enhance the corrosion resistance of DSS.