Microstructure and Mechanical Properties of Bimetallic Structure Fabricated through Wire Plus Arc Additive Manufacturing

This study investigates the fabrication and mechanical assessment of bimetallic structure (BMS) wall using wire plus arc additive manufacturing (WAAM) technology, employing stainless steel (SS) 304 and SS 308L SS filler wire. The usage of BMS is promoted due to the limitation faced during dissimilar welding of the SS grades. The high or improper melting of the interface will lead to elemental segregation, leading to structural failure. Producing seamless BMS plates will be an ideal replacement for dissimilarly welded joints. Notably, 308L SS demonstrates superior mechanical properties compared to 304 SS, exhibiting impressive tensile strength (TS) and exceptional ductility. BMS, constructed with 308L filler wire, closely matches these better mechanical attributes, making it an attractive choice for applications prioritizing mechanical performance. Furthermore, when compared to WAAM‐processed SS 304, BMS consistently outperforms in terms of TS while retaining remarkable ductility. This is due to the variation in the microstructure caused by complex thermal cycles. Hence, this research provides valuable insights into manufacturing and characterization of BMS, emphasizing the potential of WAAM‐processed BMS (SS 304/SS 308L) in engineering applications demanding superior mechanical properties while replacing dissimilar joints in the fields of aerospace, aviation, automobile, and power generation industries.