Aluminum exposure levels in workers at electrolytic production

Introduction. Occupational exposure to aluminum has been established to lead to accumulation of metal in tissues and create a risk of functional impairment in the central nervous system. The aim of the work was to assess the levels of external and internal aluminum exposure in workers at the electrolytic production of aluminum under modern occupation conditions. Materials and methods. Two hundred fifty measurements of the average shift aluminum oxide concentration were analyzed at various stages of the technological process. The urine aluminum concentration urine was determined by the atomic absorption method. Results. The aluminum oxide concentration in the housings with the unbaked anode technology varied from 0.59 to 17.95 mg/m3. The MPC was exceeded at the electrolyzer workplace in 10% of measurements, the anode maker — in 40%, and the crane operator – in 50%. In housings with a baked anode, the aluminum oxide concentration in all measurements did not exceed the MPC. The highest aluminum emission was observed in occupational groups associated with unbaked anodes. A trend model was constructed for the dependence of urine aluminum concentration on the aluminum dioxide level in the air, which has the form of an exponential curve. The bend in the curve begins with an air aluminum dioxide content of about 4.2 mg/m3. Limitations. The study is limited by the number of examined workers who underwent periodic medical examination. Conclusion. The results of biomonitoring showed the elimination of aluminum with urine to reflect the level of exposure to the toxicant. The equation of the dependence of the urine aluminum concentration on the air aluminum dioxide level was calculated.