Particle flow simulation of crack propagation and penetration in Brazilian disc under uniaxial compression

The presence of rock mass fractures has always been a subject of study for the prevention and control of related natural disasters. To understand the effects of different dip angles and horizontal distances on crack development, numerical simulation experiments on Brazilian disks under uniaxial compression were con-ducted using the PFC2D particle flow program. A function module was utilized to monitor the expansion and quantity of cracks. The numerical simulation results under 0° conditions were in good agreement with the experimental results, validating the rationality of the numerical simulation. The simulation results indicate that: under single fracture conditions with different dip angles, samples with angles between 30° and 60° produced typical wing-shaped cracks. At 0°, cracks propagat-ed through the center of the fracture, while at 90°, cracks initiated from the tip of the fracture and propagated through the sample. The peak stress and the number of cracks in the samples first decreased and then increased with the increase of the dip angle, reaching a maximum at 90°. For samples with double fractures and varying horizontal distances, all produced wing-shaped cracks. Their peak stress and the number of cracks increased monotonically with the increase in distance, reaching a maximum at a distance of 30mm. The experimental results confirmed that the PFC2D program can effectively simulate the process of crack initiation and development, and the research findings provide a reference for correctly understanding the fracture mechanics of fractured rock masses.