Atomized Reagent Addition with Synchronized Jet Pre-Mineralization to Enhance the Flotation Process: Study on Atomization Parameters and Mechanisms of Enhancement

The atomized reagent and synchronous jet pre-mineralization technology, as a novel method to enhance the flotation process, increases the solubility of fatty acid collectors in pulp through atomized reagent application and improves the mineralization effect and flotation rate via synchronous jet pre-mineralization technology, thereby laying a theoretical foundation for the flotation of minerals with fatty acid collectors. Systematic studies on the atomization method, atomization particle size, and flotation experiments revealed that, compared with conventional stirring methods, the atomized reagent method increases the solubility of sodium oleate in pulp from 82.5 mg/L to 142.9 mg/L at 288.15 K. The induction time for quartz particles treated with atomized reagents and bubbles is significantly lower than that of the conventional stirring method. Semi-industrial test results of the atomized reagent and synchronous jet pre-mineralization show that, compared to traditional roughing, the TFe grade increased by 0.87 percentage points, iron recovery increased by 3.95 percentage points, and reagent consumption decreased by 7.5 percentage points. Experimental and test results demonstrate that the atomized reagent and synchronous jet pre-mineralization technology can effectively enhance mineralization, accelerate the flotation rate, improve flotation indices, and reduce reagent consumption to a certain extent, providing significant guidance for the efficient recovery of fine-grained minerals.