Microstructural Evolution of P92 Steel with Different Creep Life Consumptions After Long-Term Service

P92 steel is widely used in ultra-supercritical units due to its excellent high-temperature performance. This paper studies the microstructure of P92 steel steam pipes in three conditions: as-supplied, after 80,000 h of service at 67.06 MPa stress, and after 100,000 h of service at 80.28 MPa stress. After prolonged service, the P92 steel retains its martensitic structure, but the lath width increases and the dislocation density decreases. In addition to M23C6, MX, and Laves phases, Z phase was also observed among the precipitates. The results indicate that the sizes of M23C6 and Laves phases increase with the progression of creep life consumption, with the coarsening rate of Laves phase being significantly higher than that of M23C6. However, the coarsening of MX phase is not evident. Compared to the Laves phase, the formation of the Z phase requires a longer period of time. The precipitation of the Z phase consumes MX carbonitrides, and it has been observed that the Z phase precipitates from the MX phase, with the two phases exhibiting a coexisting state.

Authors

Institutions

Publication Details

Journal
Metals
Published
2024-10-20
DOI
https://doi.org/10.3390/met14101191
Citations
2
Primary Topic
High Temperature Alloys and Creep
Type
article
Field-Weighted Citation Impact
0.43

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Microstructural Evolution of P92 Steel with Different Creep Life Consumptions After Long-Term Service

Liying Tang, Zhen Zhang, Zheyi Yang
2 citations
Metals
High Temperature Alloys and Creep
0.43
article

Microstructural Evolution of P92 Steel with Different Creep Life Consumptions After Long-Term Service

Liying Tang, Zhen Zhang, Zheyi Yang
article en
2 citations

Abstract

P92 steel is widely used in ultra-supercritical units due to its excellent high-temperature performance. This paper studies the microstructure of P92 steel steam pipes in three conditions: as-supplied, after 80,000 h of service at 67.06 MPa stress, and after 100,000 h of service at 80.28 MPa stress. After prolonged service, the P92 steel retains its martensitic structure, but the lath width increases and the dislocation density decreases. In addition to M23C6, MX, and Laves phases, Z phase was also observed among the precipitates. The results indicate that the sizes of M23C6 and Laves phases increase with the progression of creep life consumption, with the coarsening rate of Laves phase being significantly higher than that of M23C6. However, the coarsening of MX phase is not evident. Compared to the Laves phase, the formation of the Z phase requires a longer period of time. The precipitation of the Z phase consumes MX carbonitrides, and it has been observed that the Z phase precipitates from the MX phase, with the two phases exhibiting a coexisting state.

MetalsVol. 14(10)
Nanjing Tech University (CN), Thermal Power Research Institute (CN)
National Natural Science Foundation of China
Responsible consumption and production
Openalex Percentile: Top 42%
High Temperature Alloys and Creep
0.43
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.