On the Synthesis of Graphene Oxide/Titanium Dioxide (GO/TiO2) Nanorods and Their Application as Saturable Absorbers for Passive Q-Switched Fiber Lasers

We report passively Q-switched pulse operation through an erbium-doped fiber laser (EDFL) utilizing graphene oxide/titania (GO/TiO₂) nanorods as a saturable absorber. The GO/TiO₂ nanorods were fabricated using a Sol-gel-assisted hydrothermal method. The optical and physical characterization of the GO/TiO₂ was then characterized using a field-emission-scanning electron microscope (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and diffuses reflectance spectroscopy (DRS). To investigate the performance of the Q-switched EDFL based on the GO/TiO₂ SA, the prepared nanorods were mechanically deposited on the fiber ferrule employing adhesion effects of in-dex-matching gel. This integration of the nanorod SA resulted in a self-starting Q-switching opera-tion initiated at a pump power of 17.5 mW and sustained up to 306.9 mW. When the pump range was tuned from 17.5 to 306.9 mW, the emission wavelength varied from 1564.2 to 1562.9 nm, pulse repetition rates increased from 13.87 kHz to 83.33 kHz, and pulse width decreased from 30.27 µs to 3.75 µs. Moreover, at the maximum pump power of 306.9 mW, the laser exhibited an average output power of 0.74 mW, a peak power of 1.54 mW, and a pulse energy of 8.88 nJ. Furthermore, this study investigates the GO/TiO₂ damage threshold and prolonged stability of the proposed EDFL system.