A Hollow Hemispherical Mixed Matrix Lithium Adsorbent with High Interfacial Interaction for Lithium Recovery from Brine

Mixed matrix lithium adsorbents have attracted much interest for lithium recovery from brine. However, the absence of an interfacial interaction between the inorganic lithium-ion sieves (LISs) and the organic polymer matrix resulted in the poor structural stability and attenuated lithium adsorption efficiency. Here, a novel hollow hemispherical mixed matrix lithium adsorbent (H-LIS) with high interfacial compatibility was constructed based on mussel-bioinspired surface chemistry using a solvent evaporation induced phase transition method. The effects of types of functional modifiers, LIS loading amount, adsorption temperature and pH on their structural stability and lithium adsorption performance were systematically investigated. The optimized H-LIS adsorbent with the LIS loading amount of 50 wt.% possessed the structural merit that the LIS functionally modified by dopamine exposed on both the inner and outer surfaces of the hollow hemispheres. At the best adsorption pH of 12.0, it showed a comparable lithium adsorption capacity of 25.68 mg·g−1 to the powdery LIS within 4 h, favorable adsorption selectivity of Mg/Li and good reusability that could maintain over 90% of lithium adsorption capacity after the LiCl adsorption—0.25 M HCl pickling-DI water cleaning cycling processes for three times. The interfacial interaction mechanism of H-LIS for lithium adsorption was innovatively explored via advanced microcalorimetry technology. It suggested the nature of the Li+ adsorption process was exothermic and dopamine modification could reduce the activation energy for lithium adsorption from 15.68 kJ·mol−1 to 13.83 kJ·mol−1 and trigger a faster response to Li+ by strengthening the Li+-H+ exchange rate, which established the thermodynamic relationship between the structure and Li+ adsorption performance of H-LIS. This work will provide a technical support for the structural regulation of functional materials for lithium extraction from brine.