Optimizing Sheet Metal Formation through Advanced Hydroforming Simulation Technique

In this study, we investigate into the simulation of sheet metal hydroforming for crafting the cap of the axle-hub of a tip trailer within our manufacturing facility. This cap serves a crucial role in safeguarding wheel bearings from the detrimental effects of dust, sand, and dirt. The motivation for this work arises from the challenges encountered during the fixation of a conventional dust cap, which often falls off when subjected to pressure or threading, particularly when the tractor is in motion. The innovative approach pursued in this research involves the utilization of lightweight aluminum sheet metal for cap production, owing to its facile formability. The cap design incorporates four evenly distributed holes around its circumference and secures to the flange using screws. Prior to the manufacturing phase, a simulation of the cap-forming process was conducted using ANSYS Model 15, a computer-aided engineering program. The necessary models were crafted in CATIA, a computer-aided design program, streamlining the entire process to enhance efficiency, reduce costs, and minimize manpower requirements. The simulation encompassed three different thicknesses (1 mm, 2 mm, and 3 mm) for two distinct aluminum alloys, namely 1100 and 5652. The objective was to discern the optimal alloy for the forming process. Essential mechanical properties, including ultimate tensile strength, modulus of elasticity, and yield stress, were input into the ANSYS program to accurately reflect the materials' behavior during forming. The outcomes of our investigation revealed that aluminum alloy 5652 outperformed 1100 in terms of formability. The former exhibited a forming pressure of 300.2 MPa, while the latter required 298.3 MPa for the same forming depth (40 mm) across all three thickness variations. Additionally, the study demonstrated that 5652 is not only more efficient but also safer and more resilient than 1100.