Development and Evaluation of a Wearable Upper Limb Assistive Device with a Remote Center of Motion Mechanism

Workers in factories, construction sites, and farms are often exposed to the risk of physical disability and injury. Particularly, the lower back and shoulders require assistance, as injuries can make it difficult to continue working. While social concern about back injuries is high and preventive measures are taken, lesser attention is paid to shoulders, resulting in inadequate assistance and prevention mechanisms. Therefore, wearable, low-cost, and lightweight upper limb assistive devices that can be used in multiple scenarios are desired by workers. In this study, we proposed a device that uses a remote center of motion (RCM) mechanism, enabling the device to support user’s upper arm from below, and the rotational center of device to correspond with shoulder joint. The theoretical assist torque is designed to be sufficient for arm gravity compensation of Japanese males of standard body size. The calculated theoretical assist torque for each shoulder joint is about 8 Nm and maximum assist force for each arm was about 36.3 N (3.7 kgf). Experimental evaluation using a prototype of this device on three healthy adult males demonstrated a decrease in muscle activity of approximately 38% in the anterior deltoid, 31% in the middle deltoid, and 11% in the posterior deltoid as an average of all results in a dynamic experiment in which the participants performed the indicated movements.